Ekowood floors can be installed over properly installed heated slabs that have a temperature NOT EXCEEDING 80⁰F / 27⁰C, and that has been activated for at least 3 weeks prior to installation.
Before installation, the floor heating must be switched off. It can only be switched on again 2-3 days after installation to allow time for the glue to dry. The recommended installation for underfloor heating is the floating method. For other types of installations, please contact the distributor or manufacturer for further advice.
Kindly take note of the relative humidity (RH) of the surrounding environment.
Ekowood does NOT provide warranty for Maple, Beech, Kempas, Pecan and Jatoba over radiant heated sub-floors.